Blade BLH4925SC2 Fusion 480 RC Helicopter Super Combo

Built on years of engineering and development knowledge, the Blade® Fusion™ 480 helicopter packs all the high-end features into a rugged and durable airframe ready to rip up the skies. This powerhouse features lightweight carbon fiber and anodized aluminum construction presenting exceptional rigidity and durability. The optimized control system geometry offers the most efficient and responsive control. The quiet helical main gear is ready to be driven by a 40-43mm brushless motor bringing high power and torque. A belt-driven tail assembly is housed in construction utilizing both carbon fiber and aluminum to ensure precision performance every flight. For advanced-level 3D pilots, the Fusion 480 delivers an aggressive heli leaving the others in its dust cloud.
Features

All metal and carbon fiber construction
2mm carbon fiber frame, 3mm carbon fiber landing gear, 2.5mm tail box/fin
Efficient helical main gear paired with a steel pinion to reduce noise
Oversized 25mm tail boom eliminating the need for boom supports
6mm wide belt-driven tail with adjustable belt tension
5mm high-strength steel tail shaft paired with metal bell crank, hub and grips
Full carbon fiber and aluminum tail box with large aluminum pulley
5mm carbon fiber tail pushrod for precise tail control
High-strength steel 10mm main shaft and 8mm spindle
Standard size servos for cyclic and tail
Hidden tail servo for a sleek look
Capable of 3000 RPM head speed for aggressive flight performance
Save money and get everything needed to complete your Fusion 480 with this Super Combo!
Practice flying this aircraft in the RealFlight® simulator!

Contents

(1) Fusion 480 Helicopter Kit
(1) 4320-1300Kv Brushless Motor
(1) Avian 100 amp Smart ESC
(3) H6050 High-Torque Mid-Speed Heli Cyclic Servo
(1) H6060 Mid-Torque Ultra-Speed Heli Tail Servo
(1) FC6250HX Flight Controller
(1) 4651T SRXL2 Serial Receiver
(1) User Manual

Requires

(1) Full-range 6+ channel Spektrum™ 2.4GHz DSM2®/DSMX® Transmitter
(1) 6S 22.2V 4000mAh 50C+ LiPo Battery with EC5™ or IC5™ connector
(1) Compatible LiPo Charger

Next Generation Spektrum Flight Controller included
This Fusion 480 Super Combo kit includes the latest Flight Stabilization Technology from Spektrum, the FC6250HX. The FC6250HX is a powerful flybarless helicopter stabilization system that features the latest AS3X and SAFE Stabilization technology to deliver an extremely user friendly and precise Helicopter flying experience. Featuring a leading edge 6-axis M.E.M.S. inertial gyro, powerful and fast 32 bit ARM M4 Cortex processor and proprietary Advanced Adaptive Flight Control Algorithms, pilots will enjoy predictable and precise flight characteristics, excellent tail holding and rock-solid piro-compensation with the added security of assignable SAFE technology. Included with the FC6250HX is the latest SRXL2 Serial Receiver, the 4651T. This receiver is engineered to give Heli and Multirotor pilot’s extraordinary performance with both control range and telemetry range.
Spektrum Avian Smart 100 Amp ESC included
This Combo includes a Spektrum Avian Smart 100 amp ESC that is ready to transmit Smart Battery and ESC data straight to your Spektrum Transmitter all over one wire. An Avian electronic speed control provides a one-wire solution for obtaining telemetry data such as current, voltage, cell balance, temperature and RPM. The Avian ESCs' 32-bit M4 processor produces higher resolution signal input and more accurate motor output for a locked in and active throttle response. It also offers the ability to setup a fixed RPM governor when programmed with the Spektrum Smart ESC Programmer Box.
Frame

All metal and carbon fiber construction
2mm carbon fiber frame, 3mm carbon fiber landing gear, 2.5mm tail box/fin
Painted carbon fiber skids and tail for easy visibility
Painted fiberglass canopy
Aluminum battery tray with (2) oversized battery straps
Aluminum bearing and servo block with Optimized Servo Geometry

Tail

Oversized 25mm tail boom eliminating the need for boom supports
6mm wide belt-driven tail with adjustable belt tension
5mm high-strength steel tail shaft paired with metal bell crank, hub and grips
Full carbon fiber and aluminum tail box with large aluminum pulley
5mm carbon fiber tail pushrod for precise tail control
Hidden tail servo for a sleek look

Mechanics

480mm (main) and 85mm (tail) carbon fiber blades
Black anodized aluminum swashplate
Aluminum blade grips with CNC zero pitch indicator
High-strength steel 10mm main shaft and 8mm spindle
Efficient helical main gear paired with a steel pinion to reduce noise

Electronics/Power System

Accepts 6s 3700-5000 mAh LiPos
Accepts 40-43mm brushless outrunner motor (1300Kv – 1400Kv)
Accepts 90 Amp ESC
Accepts Standard sized servos for cyclic and tail
Aluminum battery tray with (2) oversized battery straps
Accepts popular flybarless control systems and receivers

Spektrum SPSH6050 Mid-Torque Mid-Speed Heli Cyclic/Tail Servo
The H6060 is a budget friendly digital tail rotor servo that is purpose built for helicopter models up to 500 size. Featuring a powerful coreless motor that delivers a potent 86oz of torque and a blazing fast .056 sec (at 6.0V) and durable fully metal gear train. Built into a standard size case, this servo is a perfect fit for the Blade Fusion 480 and many other high performance heli models.
Features

Standard size servo for 500 size Helicopter models and smaller

86oz Torque and .056 sec speed at 6.0v

4.8v-6.0v input voltage

Long 10 inch (255mm) connector wire to reduce the need for extensions

23 Tooth spline

Bearing supported output spline

Spektrum SPSH6060 Mid-Torque Ultra-Speed Heli Tail Servo
The H6060 is a budget friendly digital tail rotor servo that is purpose built for helicopter models up to 500 size. Featuring a powerful coreless motor that delivers a potent 86oz of torque and a blazing fast .056 sec (at 6.0V) and durable fully metal gear train. Built into a standard size case, this servo is a perfect fit for the Blade Fusion 480 and many other high performance heli models.
Features

Standard size servo for 500 size Helicopter models and smaller

86oz Torque and .056 sec speed at 6.0v

4.8v-6.0v input voltage

Long 10 inch (255mm) connector wire to reduce the need for extensions

23 Tooth spline

Bearing supported output spline

Blade BLH4953 E-Flite Brushless Motor 4320 Size 1300kv
Blade Brushless Motor 4320-1300kV BLH4953 is compatible with BLH4925SC
Spektrum SPMXCA200 Smart ESC Programmer Avian / Firma
Set, review, adjust and save the operating parameters of your Avian and Firma electronic speed controls using the Spektrum Smart ESC Programmer. When connected to a PC using the included USB cable, the programmer will update Smart ESC firmware and can adjust parameters through the Spektrum SmartLink app. You can also use it to check the balance of your LiPo battery cells.
Features

Review, adjust and save Spektrum Smart ESC parameters

Connect (via USB) to a PC to update Smart ESC firmware and adjust parameters via Spektrum SmartLink PC app

Check a LiPo battery's cell balance

Spektrum SPM9745 DSMX Remote Receiver
The next generation of Spektrum remote receivers are here with the SPM9745 and SPM9746 Receivers. Featuring a user friendly antenna setup that allows for the antenna to be placed in 2 positions, making installation into those tight projects easier than ever. Fully compatible with DSMX and DSM2 Transmitters*. Use these to add more receiving points on any Spektrum receiver that has 1 or more Remote receiver ports.
The remote receiver includes one 24-inch extension; however, various lengths of receiver extensions can be purchased allowing various placement options for mounting purposes. Additional remote receiver extensions are available in 6", 9", 12", 24" and 36" lengths.
*DSMX Remote Receivers must be used with a DSMX Main Receiver.
Repositionable Antenna
This antenna design allows for easy repositioning with the option to exit the case from the side or top. It also offers added strain relief to the antenna wire, and is optimized to fit into the tightest of Remote control aircraft.
Features

Case design offers better strain relief on antenna lead
DSMX with DSM2 Backward compatibility*
22ms and 11ms Compatible
Upgrade for any Spektrum receiver with available remote receiver ports
Great addition to AR636, AR7350, AR9350, Telemetry Receivers and PowerSafe receivers
Includes 24 inch extension

Spektrum Avian 100A Brushless Smart ESC
The Spektrum Avian 100A Smart ESC for aircraft delivers power and intelligence all-in-one. Without additional sensors or modules, it feeds battery and ESC telemetry data straight to your radio in real time, all over one simple connection.
Like every component in the Spektrum Smart ecosystem, Avian Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Smart electronics — together, creating the best-performing RC system for your aircraft imaginable.
Avian Smart Air ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Avian Smart Air ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Avian Smart Air ESCs, you'll be better connected to your aircraft than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. An Avian electronic speed control provides a one-wire solution for obtaining telemetry data such as current, voltage, cell balance, temperature and RPM.
Avian ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You're able to adjust settings as needed to boost performance on the go. The Avian Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior!
Features

Smart all-in-one telemetry

Fast, powerful 32-bit ARM M4 processor

Multiple options for easy programming:

Smart ESC Programming Box

SmartLink USB Updating and Programmer application

Throttle stick programming

Multi-point protection:

Over-current protection

Automatic LiPo low-voltage cutoff

Thermal protection

Failsafe protection

Developed and designed by Spektrum engineers, in partnership with the industry's leading ESC manufacturer

Compact for easy installation in most applications

Ready to install — no soldering required

Rugged plastic case

Heat dissipating design

Tabs included for a hard mount

Aluminum heat sink for high efficiency

Cooling fan

Adjustable high-power BEC

Dual BEC power connectors

Firmware updatable through the Smart ESC Programming Box and SmartLink PC application

High heat-resistant IC connectors, backwards compatible with EC connectors

Limited 1-year warranty

Contents

(1) Spektrum Avian Smart ESC

(1) Spektrum Smart sticker sheet

(1) Product Manual

Requires

Spektrum Aircraft Receiver

Spektrum Smart Technology LiPo Battery

Spektrum Transmitter